Members can listen to music!
🔑 Login
📝 Register
MENU
HOME
DATABASE
COMPANIES
TYPES
DOWNLOAD
BIRTHDAY
BOOKS
CONTACT
ℹ️ Info
💾 ROM
✏️ Edit
📤 Upload
Edit the information for
Player's Edge Plus Set Chip [Model SET012]
NAME
E-MAIL
Actual Entry (non editable)
Player's Edge Plus Set Chip (c) 1987 IGT [International Game Technologies]. A set chip, or "denomination setup chip" is a chip that you temporarially install on the MPU circuit board to enable the bill validator. It essentially gives permission to the machine to enable the bill validator. - TIPS AND TRICKS - To enable the bill validator on a PE+: - Turn the machine off. - Remove the MPU board. - Remove the current chip in the Program socket. - Install the SET chip in the Program socket (make sure to install the chip with the notch in the same direction as the chip you removed). - Put the MPU board back in the machine and turn the power on. Follow the directions on the screen -- use the Jackpot Reset key to set the correct denomination ($0.05, $0.25, etc.), and use the Deal/Draw button to toggle the Disabled/Enabled option to Enabled. Make sure to press the white self test button to save the settings, and wait until you see Options Saved on the screen. Once you've done that: - Turn the machine off. - Remove the MPU board. - Remove the SET chip from the Program socket and put your game program back in its place. - Install the MPU board again. - Turn the machine on -- your bill validator should now work. - SOURCES - Soft's ROMs.
Your Changes (editable)
Player's Edge Plus Set Chip (c) 1987 IGT [International Game Technologies]. A set chip, or "denomination setup chip" is a chip that you temporarially install on the MPU circuit board to enable the bill validator. It essentially gives permission to the machine to enable the bill validator. - TIPS AND TRICKS - To enable the bill validator on a PE+: - Turn the machine off. - Remove the MPU board. - Remove the current chip in the Program socket. - Install the SET chip in the Program socket (make sure to install the chip with the notch in the same direction as the chip you removed). - Put the MPU board back in the machine and turn the power on. Follow the directions on the screen -- use the Jackpot Reset key to set the correct denomination ($0.05, $0.25, etc.), and use the Deal/Draw button to toggle the Disabled/Enabled option to Enabled. Make sure to press the white self test button to save the settings, and wait until you see Options Saved on the screen. Once you've done that: - Turn the machine off. - Remove the MPU board. - Remove the SET chip from the Program socket and put your game program back in its place. - Install the MPU board again. - Turn the machine on -- your bill validator should now work. - SOURCES - Soft's ROMs.
Explain Your Changes (required!)
Select Captcha:
